C4 Coring Rig

Product Details
Customization: Available
Manufacturer/Factory, Group Corporation
Gold Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1220000 USD
Plant Area
>2000 square meters
  • C4 Coring Rig
  • C4 Coring Rig
  • C4 Coring Rig
  • C4 Coring Rig
  • C4 Coring Rig
Find Similar Products

Basic Info.

Model NO.
C4
HS Code
8430412900

Product Description

FORWARD C4 CORING DRILL RIG


FORWARD'S C4 is a compact crawler mounted rig with all the user-friendly functions drillers are looking for and all at their fingertips. The rigs are built under strict quality control protocols and are rigorously tested before dispatch.
 
The C4 has been built with reliability in mind and is assembled using only the very best first-world components such as Rexroth pumps and HAVE valves, Rexroth and Eaton hydraulic motors, Manuli Hoses and Cummin engines.

The C4 has the 4 speeds gear box provides free combination of torque and rotation speed.

The C4 equipped PQ chuck and 3500 mm stroke of rotation facilitates handling of rods of 3 meters length.

The wonderful convenience of control of feeding pressure, Real time reading of drilling data on gauges on the control panel. Mud pump and mixer powered by the rig's hydraulic system, controlled directly on the rig's panel

With safety in mind, the C4 has all the features that you'd expect in a modern rig such as safety guards and emergency stop buttons on all corners of the rig, fire extinguishers and optional automatic Co2 fire suppression.

ROTATION HEAD
  • The 4 Speed Rotation Head can accept all sizes of coring rods up to PQ.
  • Patented chuck jaws and hydraulic opening/spring close function insures a fail-safe operation.
  • The Rotation Head is connected direct to the hydraulic feed cylinder which simplifies the whole mast design and minimizes maintenance.
  • The Rotation Head also rotate to the side and opens the whole mast up to run casing or pull tubes etc.  

MAST
  • The Rigid design of the mast provides superior performance and reliability even under the toughest geological conditions.
  • The set-up controls are mounted at the side of the rig and can be isolated from the circuit during drilling operations.
  • The Mast raise cylinders are equipped with balancing valves to increase safety.
  • The folding mast allows the rig to be transported on short trailers or in a shipping container.
  • The Dump Mast reaches the ground at angles up to 45degrees and ensures all the pullback forces are absorbed by the ground and not the rig.


CONTROL PANEL
  • Both the Rotation and Fine Feed controls are fitted with friction dampeners with positive and easy to find neutral positions.
 
  • All the gauges are conveniently located for ease of monitoring.

HOOD:
The steel hood provides adequate protection from the elements yet opens up for ease of
maintenance.

HYDRAULIC SYSTEM:
All the hydraulic pumps are genuine Variable Displacement, Pressure Compensated, Load Sensed Sauer Danfoss Piston pumps.     

MAIN HAUL WINCH:
The Haul Winch is securely mounted central to the rig chassis.

WIRELINE WINCH:
The Wireline Winch has auto spooling and 1500 meters capacity.
 
CRAWLER CHASSIS:
The Crawler chassis is manufactured in house and has quality Korean sourced hydraulic drive motors.

MUD PUMP:
The 1000psi mud pump is conveniently located at the front of the rig for ease of maintenance but high enough to allow a descent angle of attack when traversing creek beds

TECHNICAL SPECIFICATIONS:
                                                                             
ROD SIZE MUD FILLED HOLE
Drill Rod/Core Barrel Hole Depth (Meters) Hole Depth (Feet)
BRQ/BQ 1,300 4,265
NRQ/NQ/NQ2 1000 3,280
HRQ/HQ 700 2,300
PHD/PQ 400 1,312
*The figures have been calculated based on a vertical, straight, clean down hole using a 8000Kg hoist (single line pull). Actual drilling capacity will depend on in-hole tools, conditions, drilling techniques and equipment used.
Engine
Cummins 6BTA5.8-C180, liquid cooled, turbo changed, inter-cooled diesel engine
  Metric U.S.
Displacement 5.9 L 5.9 L
Power (maximum) at 2,500 RPM 132 KW 180 HP
Emissions Certification EU II EU II
Torque and RPM Ratings
(hydraulic motor at maximum/minimum displacement at 2,200rpm engine setting)
  Speed (no load) Torque (stall) (Max)
  RPM Nm
1st Gear 0 - 190 4 257
2nd Gear 180 - 378 2 408
3rd Gear 380 - 679 1 340
4th Gear 670 - 1200 680
NOTE: Drill head output speed and torque are infinitely variable in each gear range as indicated. Actual rotation speed is affected by engine RPM and hydraulic motor displacement setting.
 
Hydraulic System
  Metric U.S.
Primary Pump Axial piston, variable displacement load sensing, pressure compensated with low pressure standby.
Max Flow 182 L/min 48 gpm
Maximum Pressure* 28 Mpa 4 060 psi
Secondary Pump Axial piston, variable displacement load sensing, pressure compensated with low pressure standby.
Max Flow 135 L/min 11 gpm
Maximum Pressure* 20 Mpa 2 900 psi
Tertiary Pump Axial piston, variable displacement load sensing, pressure compensated with low pressure standby.
Max Flow 39 L/min 26 gpm
Maximum Pressure* 21.5 Mpa 3 120 psi
*Factory setting
 
Drill Head
Stand PQ - Hollow Spindle
Rotation Motor Bosch Rexroth hydraulic motor - variable/reversible
Mechanical Transmission Funk 4 speed
Final Drive Straight cut gears
Head lateral movement Hydraulically operation
Hydraulic PQ Chuck Hydraulically opened. Disk spring closed.
  Axial holding capacity of 244 640 N (55 000 lbf)
Drill Head Lubrication Force fed to the bearings and oil bath for gears
Lubricating Oil Filtration 25 micron high pressure oil filter
 
Drill Mast And Feed System
  Metric U.S.
Feed Stroke 3.5 m 11.5 ft
Feed Pull 107 000 N 24 054 lbf
Feed Thrust 59 600 N 13 400 lbf
Rod pull 6 m 20 ft
Drilling Angle 30º off horizontal to 90º vertical down
Draw Works
  Metric U.S.
Main Line Hoist
Double speed motor
Hook Load ( single part line)
Bare Drum 80 000 N 17 894 lb
Hoisting Speed (single part line)
High Speed (Bare Drum) 85 m/min 278 ft/min
Low Speed (Bare Drum) 50 m/min 164 ft/min
Main Hoist Cable 22mm 0.886 in
Minimum Breaking Strength 160 000 N 35970 Lbf
Foot Clamp Capacity PWT
Wireline Hoist
Line Pull
Bare Drum 1 500 Kg 3 300 lb
Full Drum 425 Kg 940 lb
Line Speed
Bare Drum 121 m/min 395 m/min
Full Drum 430 m/min 1 410 m/min
Drum Capacity
(6mm swaged)
1 600 m 5 250 ft
Minimum Breaking Strength 3 420 Kg 7 540 lb
Additional Information
  Metric U.S.
Fuel Tank Capacity 200 L 52 US gal
 
Fluid Circulation Pump
Single-Action Triplex Piston Pump, Manual shift, Pump Speed are infinitely variable.
  Metric U.S.
Displacement 0 - 160 LPM 0 - 42 gpm
Pressure 0 - 10 Mpa 0 - 1 450 psi

DIMENSIONS AND WEIGHT
 
Dimensions and Weight
Weight 8 500 Kg
Transportation Dimensions (L×W×H) 6 200 ×2 240 × 2 600 mm



 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier